S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Manage Device Security User Manual238
The Packets Filtered field displays the number of packets filtered (none in the previous
figure).
6. To refresh the page with the latest information about the switch, click the Refresh button.
The following table describes the nonconfigurable data that is displayed.
Table 55. Access profile configuration profile summary
Field Description
Rule Type The action performed when the rules match.
Service Type The service type selected. The policy is restricted by the selected service type.
Source IP Address The source IP address of the client originating the management traffic.
Mask The subnet mask of the IP Address.
Priority The priority of the rule.
Deactivate an Access Profile
You can deactivate an access profile.
To deactivate an access profile:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Discover or Change the Switch IP
Address on page 12.