S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Manage Device Security User Manual262
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Discover or Change the Switch IP
Address on page 12.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is
password.
The System Information page displays.
5. Select Security
> ACL > ACL
Wizard.
The previous figure shows the ACL Wizard page for models GS324T and GS324TP.
6. From the ACL Type menu, select the type of
ACL.
You can select from the following ACL types:
• ACL Based on Destination MAC. Creates an ACL based on the destination MAC
address, destination MAC mask, and VLAN.
• ACL Based on Source MAC
. Creates an ACL based on the source MAC address,
source MAC mask, and VLAN.
• ACL Based on Destination IPv4
. Creates an ACL based on the destination IPv4
address and IPv4 address mask.
• ACL Based on Source IPv4
. Creates an ACL based on the source IPv4 address and
IPv4 address mask.
• ACL Based on Destination IPv4 L4 Port. Creates an ACL based on the destination
IPv4 Layer 4 port number.
•
ACL Based on Source IPv4 L4 Port. Creates an ACL based on the source IPv4
Layer 4 port number.