S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Configure System Information User Manual46
7. Click the Refresh button to refresh the page with the latest information about the switch.
The following table displays the nonconfigurable SNTP Global Status information.
Table 10. SNTP Global Status information
Field Description
Version The SNTP version that the client supports.
Supported mode The SNTP modes that the client supports. Multiple modes can be supported by a client.
Last Update Time The local date and time (UTC) that the SNTP client last updated the system clock.
Last Attempt Time The local date and time (UTC) of the last SNTP request or receipt of an unsolicited
message.
Last Attempt Status The status of the last SNTP request or unsolicited message for both unicast and
broadcast modes. If no message was received from a server
, a status of Other is
displayed.
These values are appropriate for all operational modes.
• Other.
The status of the last request is unknown.
• Success. The SNTP operation
was successful and the system time was updated.
• Request Timed Out. After an SNTP request was sent to an SNTP server, the
response timer expired before a response from the server was received.
• Bad
Date Encoded.
The time provided by the SNTP server is not valid.
• Version
Not Supported. The SNTP version
supported by the server is not
compatible with the version supported by the client.
• Server Unsynchronized.
The SNTP server is not synchronized with its peers. This
is indicated by the leap indicator field in the SNTP message.
• Server
Kiss Of Death.
The SNTP server indicated that no further queries were to be
sent to this server.
This is indicated by a stratum field equal to 0 in a message
received from a server.
Server IP Address The IP address of the server for the last received valid packet. If no message was
received from any server
, an empty string is shown.
Address Type The address type of the SNTP server address for the last received valid packet.