Configure System Information
105
S3300 Smart Managed Pro Switch
Table 35. LLDP-MED Neighbors Information
Field Description
LLDP-MED Interface Selection
Remote ID Specifies the remote client identifier assigned to the remote system.
Capability Information This table specifies the supported and enabled capabilities received in MED
TLV on this port.
Supported Capabilities Specifies supported capabilities received in MED TLV on this port.
Enabled Capabilities Specifies enabled capabilities received in MED TLV on this port.
Device Class Specifies the device class as advertised by the device remotely connected to
the port.
Network Policies
Information
This table specifies if network policy TLV is received in the LLDP frames on this
port.
Media Application Type Specifies the application type. Types of application types are unknown,
voicesignaling, guestvoice, guestvoicesignalling, softphonevoice,
videoconferencing, streamingvideo, videosignalling. Each application type that
is received has the VLAN ID, priority, DSCP, tagged bit status and unknown bit
status. A port may receive one or many such application types. If a network
policy TLV has been received on this port, only then would this information be
displayed.
VLAN ID Specifies the VLAN ID associated with a particular policy type.
Priority Specifies the priority associated with a particular policy type.
DSCP Specifies the DSCP associated with a particular policy type.
Unknown Bit Status Specifies the unknown bit associated with a particular policy type.
Tagged Bit Status Specifies the tagged bit associated with a particular policy type.
Inventory Information This table specifies if inventory TLV is received in LLDP frames on this port.
Hardware Revision Specifies the hardware version of the remote device.
Firmware Revision Specifies the firmware version of the remote device.
Software Revision Specifies the software version of the remote device.
Serial Number Specifies the serial number of the remote device.
Manufacturer Name Specifies the manufacturer name of the remote device.
Model Name Specifies the model name of the remote device.
Asset ID Specifies the asset ID of the remote device.
Location Information This table specifies if location TLV is received in LLDP frames on this port.
Sub Type Specifies the type of location information.
Location Information Specifies the location information in a string for a given type of location ID.
To Next Page
Loading...
Need help?
General
