Maintenance
301
S3300 Smart Managed Pro Switch
Note: To download SSL PEM files, SSL must be administratively disabled,
and there can be no active SSH sessions.
3. The Image Name field is visible only when File Type - Software is selected. From the
Image Name field, select one of the images from the list.
• image1 — Select image1 to download image1.
• image2 — Select image2 to download image2.
Note: Do not overwrite the active image. If you attempt to do this, the
system will display a warning.
4. Next to Select File, click the Browse button to locate the file you want to download. Give
the name, along with the path for the file you want to download. The factory default is blank.
5. Click the Apply button.
Note: After a file transfer is started, wait until the screen refreshes. When
the screen refreshes, the Select File option is blanked out. This
indicates that the file transfer is done.
Note: After the text configuration file is downloaded, the stack applies the
configuration automatically.
6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
USB File Download
Use the USB File Download screen to download a file to the switch from a USB device.
To access the USB File Download page, click Maintenance > Download > USB File
Download. The following page is displayed.
To Next Page
Loading...
