NETGEAR S3300 User Manual

Getting Started
36
S3300 Smart Managed Pro Switch
4. Click the Apply button.
The settings you configure in the heading row are applied to all ports and LAGs.
Online Help
The Help main navigation tab of the web management interface provides access to the
menus that are described in the following sections:
• Support on page 36
• User Guide on page 36
Support
The Support screen provides access to the NETGEAR support website at
support.netgear.com.
 To access the support website from the web management interface:
1. Select Help > Support.
The Support screen displays.
2. Click the Apply button to access the NETGEAR support site for the switch.
User Guide
The S3300 Smart Managed Pro Switch User Guide (the guide you are now reading) is
available at the NETGEAR download center at
downloadcenter.netgear.com.
 To access the reference manual online from the web management interface:
1. Select Help > User Guide.
2. Click the Apply button to access the NETGEAR download center.
3. Enter the model number of the switch.
4. Locate the S3300 Smart Managed Pro Switch User Guide on the product support web
screen.

NETGEAR S3300 Specifications

General

Model	NETGEAR S3300
Category	Switch
VLAN Support	Yes
Quality of Service (QoS)	Yes
MAC Address Table Size	16K
Uplink Ports	4 x 10G SFP+
Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Layer	Layer 2+/Layer 3 Lite
Management	Web-based GUI, SNMP
Dimensions	440 x 257 x 43 mm (17.32 x 10.12 x 1.69 in)
Jumbo Frame Support	Yes
Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Humidity	90% maximum relative humidity, noncondensing
Power Supply	Internal power supply
Power Consumption	Varies by model
Ports	24 or 48 x 10/100/1000BASE-T
Weight	3.60 kg (7.94 lb)