NETGEAR S3300 User Manual

Configuring Switching
143
S3300 Smart Managed Pro Switch
LACP Configuration
The LACP configuration screen is used to set the LACP system priority.
 To configure LACP:
1. Select Switching> LAG > Advanced > LACP Configuration.
2. In the LACP System Priority field, specify the device’s link aggregation priority relative to the
devices at the other ends of the links on which link aggregation is enabled.
A higher value indicates a lower priority. You can change the value of the parameter
globally by specifying a priority from 1–65535. The default value is 32768.
3. Click the Apply button.
LACP Port Configuration
The LACP port configuration screen is used to configure the LACP priority value for the
selected port and the administrative LACP time-out value.
 To configure LACP port priority settings:
1. Select Switching> LAG > Advanced > LACP Port Configuration.
2. Select the ports to configure:
For information about how to select and configure one or more ports and LAGs, see
Configuring Interface Settings on page 32.
3. Configure the LACP Priority value for the selected port(s).
This value specifies the device’s link aggregation priority relative to the devices at the
other ends of the links on which link aggregation is enabled. A higher value indicates a
lower priority.
4. Configure the administrative LACP time-out value.
• Long. Specifies a long time-out value.
• Short. Specifies a short time-out value.
5. Click the Apply button.

NETGEAR S3300 Specifications

General

Model	NETGEAR S3300
Category	Switch
VLAN Support	Yes
Quality of Service (QoS)	Yes
MAC Address Table Size	16K
Uplink Ports	4 x 10G SFP+
Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Layer	Layer 2+/Layer 3 Lite
Management	Web-based GUI, SNMP
Dimensions	440 x 257 x 43 mm (17.32 x 10.12 x 1.69 in)
Jumbo Frame Support	Yes
Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Humidity	90% maximum relative humidity, noncondensing
Power Supply	Internal power supply
Power Consumption	Varies by model
Ports	24 or 48 x 10/100/1000BASE-T
Weight	3.60 kg (7.94 lb)