NETGEAR S3300 User Manual

360
B
B. Hardware Specifications and
Default Values
Switch Specifications
The switch conforms to the TCP/IP, UDP, HTTP, ICMP, TFTP, DHCP, IEEE 802.1D, IEEE
802.1p, and IEEE 802.1Q standards.
Table 108. S3300 Switch Specifications and Performance
Feature Value
S3300-28X 24 10/100/1000Mbps
2 10G/1G SFP+ ports
2 10G/1G/100M RJ45 ports
S3300-28X-PoE+ 24 POE+ 10/100/1000Mbps
2 10G/1G SFP+ ports
2 10G/1G/100M RJ45 ports
S3300-52X 48 10/100/1000Mbps
2 10G/1G SFP+ ports
2 10G/1G/100M RJ45 ports
S3300-52X-PoE+ 48 PoE+ 10/100/1000Mbps
2 10G/1G SFP+ ports
2 10G/1G/100M RJ45 ports
Flash memory size 64 MB Flash SPI
SRAM size and type 256 MB DDR3 SDRAM
Switching capacity Non-Blocking Full WireSpeed on all packet sizes
Forwarding method Store and Forward
Packet forwarding rate 10M:14,880 pps
100M:148,810 pps
1G:1,488,000 pps
10G:14,880,000 pps
MAC addresses 16K

NETGEAR S3300 Specifications

General

Model	NETGEAR S3300
Category	Switch
VLAN Support	Yes
Quality of Service (QoS)	Yes
MAC Address Table Size	16K
Uplink Ports	4 x 10G SFP+
Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Layer	Layer 2+/Layer 3 Lite
Management	Web-based GUI, SNMP
Dimensions	440 x 257 x 43 mm (17.32 x 10.12 x 1.69 in)
Jumbo Frame Support	Yes
Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Humidity	90% maximum relative humidity, noncondensing
Power Supply	Internal power supply
Power Consumption	Varies by model
Ports	24 or 48 x 10/100/1000BASE-T
Weight	3.60 kg (7.94 lb)