NETGEAR S3300 - Export (Upload) a File From the Switch

Maintenance
294
S3300 Smart Managed Pro Switch
Export (Upload) a File From the Switch
The switch supports system file exports (uploads) from the switch to a remote system by
using either TFTP or HTTP.
The Export menu contains links to the features described in the following sections.
• Export a File to the TFTP Server on
page 294
• HTTP File Export on p
age 295
• USB File Export o
n page 296
Export a File to the TFTP Server
Use the TFTP File Export screen to export (upload) configuration (ASCII), log (ASCII), and
image (binary) files from the switch to a TFTP server on the network.
 To export a file from the switch to the TFTP server:
1. Select Main
tenance > Export > TFTP File Export.
Figure 105. TFTP File Export
2. From the File Type list, specify the type of file you want to export. The factory default is Text
Configuration.
• T
ext Configuration. Retrieve the stored text configuration.
• Er
ror Log. Retrieve the system error (persistent) log, sometimes referred to as the
event log.
• T
rap Log. Retrieve the system trap records.
• Buffered Log.
Retrieve the system buffered (in-memory) log.
• T
ech Support. Retrieve the tech support file, which contains a variety of hardware,
software, and configuration information that can assist in device and network
troubleshooting.
• Cra
sh Logs. Specify crash logs to retrieve them.