NETGEAR S3300 User Manual

Managing Device Security
286
S3300 Smart Managed Pro Switch
IPv6 ACL
An IPv6 ACL consists of a set of rules which are matched sequentially against a packet.
When a packet meets the match criteria of a rule, the specified rule action (Permit/Deny) is
taken and the additional rules are not checked for a match. On this menu, the interfaces to
which an IP ACL applies must be specified, as well as whether it applies to inbound or
outbound traffic. Rules for the IPv6 ACL are specified/created using the IPv6 Rules screen.
 To add an IPv6 ACL:
1. Select Security > ACL > Advanced > IPv6 ACL.
The current number of the IP ACLs configured on the switch is displayed in the Current
Number of ACL area. The maximum number of IP ACLs that can be configured on the
switch is displayed in the Maximum ACL field, depending on the hardware. The name of
IPv6 ACL can be configured in IPv6 ACL field. The number of the rules associated with
the IP ACL is displayed in the Rules field. The ACL type is IPv6 ACL and displayed in the
Type field.
2. In the IPv6 ACL field, specify a name to identify the IPv6 ACL.
3. Click the Add button.
 To delete an IPv6 ACL:
1. Select the check box associated with the ACL.
2. Click the Delete button.

NETGEAR S3300 Specifications

General

Model	NETGEAR S3300
Category	Switch
VLAN Support	Yes
Quality of Service (QoS)	Yes
MAC Address Table Size	16K
Uplink Ports	4 x 10G SFP+
Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Layer	Layer 2+/Layer 3 Lite
Management	Web-based GUI, SNMP
Dimensions	440 x 257 x 43 mm (17.32 x 10.12 x 1.69 in)
Jumbo Frame Support	Yes
Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Humidity	90% maximum relative humidity, noncondensing
Power Supply	Internal power supply
Power Consumption	Varies by model
Ports	24 or 48 x 10/100/1000BASE-T
Weight	3.60 kg (7.94 lb)