Monitoring the System
325
S3300 Smart Managed Pro Switch
EAP Statistics
Use the EAP Statistics screen to display information about EAP packets received on a
specific port.
To display the EAP statistics screen, select Moni
toring > Ports > EAP Statistics.
The following table describes the EAP statistics displayed on the screen.
Table 103. EAP statistics
Field Description
Ports The interface which is polled for statistics.
Frames Received The number of valid
EAPOL frames received on the port.
Frames Transmitted The number of EAPOL frames transmitted through the port.
Start Frames Received The number of EAPOL Start frames received on the port.
Logoff Frames Received The number of EAPOL Log off frames that have been received on the port.
Last Frame Version The protocol version number attached to the most recently received EAPOL
fr
ame.
Last Frame Source The source MAC Address attached to the most recently received EAPOL
frame.
Invalid Frames Received The number of unrecognized EAPOL fra
mes received on this port.
Length Error Frames Received The number of EAPOL frames with an invalid Packet Body Length received on
this port.
Response/ID Frames Received The number of EAP Respond ID frames that have be
en received on the port.
Response Frames Received The number of valid EAP Response frames received on the port.
Request/ID Frames
T
ransmitted
The number of EAP Requested ID frames transmitted through the port.
Request Frames Transmitted The number of EAP Request frames transmitted through the port.
Use the buttons at the bottom of the screen to perform the following actions:
• T
o clear all the EAP counters for all ports on the switch, select the check box in the
row heading and click the Clear button. The button resets all statistics for all ports to
default values.
• T
o clear the counters for a specific port, select the check box associated with the port
and click the Clear button.
Click Up
date to update the page with the latest information on the switch.
To Next Page
Loading...
