NETGEAR S3300 User Manual

Configuring Routing
222
S3300 Smart Managed Pro Switch
Remove an ARP Entry From the ARP Cache
Use this screen to remove certain entries from the ARP Table.
 To remove entries from the ARP table:
1. Select Routing > ARP > Advanced > ARP Entry Management.
2. From the Remove From Table list, select the type of ARP entry to be removed.
The choices listed specify the type of ARP Entry to be deleted:
• All Dynamic Entries
• All Dynamic and Gateway Entries
• Specific Dynamic/Gateway Entry
• Specific Static Entry
• None Select this option if you do not want to delete any entry from the ARP Table.
3. If Specific Dynamic/Gateway Entry or Specific Static Entry is the selected type, enter the IP
address of the entry to remove from the ARP table.
4. Click the Apply button.

NETGEAR S3300 Specifications

General

Model	NETGEAR S3300
Category	Switch
VLAN Support	Yes
Quality of Service (QoS)	Yes
MAC Address Table Size	16K
Uplink Ports	4 x 10G SFP+
Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Layer	Layer 2+/Layer 3 Lite
Management	Web-based GUI, SNMP
Dimensions	440 x 257 x 43 mm (17.32 x 10.12 x 1.69 in)
Jumbo Frame Support	Yes
Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Humidity	90% maximum relative humidity, noncondensing
Power Supply	Internal power supply
Power Consumption	Varies by model
Ports	24 or 48 x 10/100/1000BASE-T
Weight	3.60 kg (7.94 lb)