Managing Device Security
241
S3300 Smart Managed Pro Switch
Management Security Settings
From the Management Security menu, you can configure the login password, Remote
Authorization Dial-In User Service (RADIUS) settings, Terminal Access Controller Access
Control System (TACACS+) settings, and authentication lists.
The Management Security folder contains links described in the following sections.
• Change Password on page 241
• RADIUS Configuration on page 243
• Configure TACACS+ on page 247
• Authentication List Configuration on page 249
• Smart Control Center Utility on page 251
Change Password
Use this screen to change the login password.
To change the login password for the management interface:
1. Select Security > Management Security > User Configuration > Change Password.
2. Specify the current password in the Old Password field.
The entered password is displayed in asterisks (*). Passwords are 1–20 alphanumeric
characters in length and are case sensitive.
3. Enter the new password.
It does not display as it is typed, and only asterisks (*) will show on the screen.
Passwords are 1–20 alphanumeric characters in length and are case sensitive.
4. To confirm the password, enter it again to make sure you entered it correctly.
The password does not display, but will show asterisks (*)
5. Click the Apply button.
To reset the password to the default value:
1. Select the Reset Password check box.
2. Click the Apply button.