NETGEAR S3300 - Slot Information

Configure System Information
47
S3300 Smart Managed Pro Switch
Slot Information
Use the Slot Information screen to display details about the different slots in the different units
in the switch stack.
 To display the Slot Information:
Select System > Management > Slot Information.
Table 12 describes the information that the Slot Information screen displays.
Bytes Used Displays the size of memory used on the USB flash device.
Bytes Free Displays the size of memory free on the USB flash device.
USB Directory Details
File Name Displays the name of the file stored in the USB flash drive.
File Size Displays the size, in bytes, of the file stored in the USB flash drive.
Modification Time Displays the last modification time of the file stored in the USB flash drive.
Table 12. Slot Information
Field Description
Slot Summary
Slot Identifies the slot using the format unit/slot.
Status Displays whether the slot is empty or full.
Administrative State Displays whether the slot is administratively enabled or disabled.
Power State Displays whether the slot is powered on or not.
Configured Card Model
ID
Displays the model ID of the card configured for the slot.
Configured Card
Description
Displays the description of the card configured for the slot.
Inserted Card Model ID Displays the model ID of the card inserted into the slot.
Inserted Card Description Displays the description of the card inserted into the slot.
Card Power Down Displays whether the card in the slot is powered down.
Card Pluggable Displays whether the inserted card is pluggable or not.
Supported Card
Card Model Displays the list of models of all cards that can be supported.
Table 11. USB Device Information (continued)
Field Description