NETGEAR S3300 - VLAN Status

Configuring Switching
147
S3300 Smart Managed Pro Switch
 To configure the same VLAN membership settings for all ports and LAGs:
1. Select Switching> VLAN > Advanced > VLAN Membership.
2. In the VLAN ID list, select the VLAN to which you want to add ports.
3. In the Group Operations list, select one of the following options:
• Untag All. All frames transmitted from this VLAN will be untagged. All the ports will be
included in the VLAN.
• Tag All. All frames transmitted for this VLAN will be tagged. All the ports will be
included in the VLAN.
• Remove All. Excluding all ports from the selected VLAN.
4. Click the Apply button.
VLAN Status
This VLAN Status screen displays the status of all currently configured VLANs.
 To view the current VLAN status:
1. Select Switching> VLAN > Advanced > VLAN Status.
2. View the following VLAN status information:
• VLAN ID. The VLAN identifier (VID) of the VLAN. The range of the VLAN ID is (1 to
4093)
• VLAN Name. The name of the VLAN. VLAN ID 1 is always named Default.
• VLAN Type. The VLAN type:
- Default (VLAN ID = 1). Always present.
- Static. A VLAN an administrator has configured.
- Dynamic. The VLAN that is created by GVRP registration initially has a type of
Dynamic (GVRP).
The type of AUTO VoIP VLAN is Dynamic (AUTO VoIP). The VLAN that is created
by MVRP registration initially has type of Dynamic (MVRP). The VLAN that is
created by DOT1x registration has a type of Dynamic (DOT1X). The type of Auto
Video VLAN is Auto-Video.
• Routing Interface. The routing interface.
• Member Ports. The ports that are included in the VLAN.