Configure System Information
110
S3300 Smart Managed Pro Switch
Neighbors Information
Use the LLDP Neighbors Information screen to view the data that a specified interface has
received from other LLDP-enabled systems.
To view LLDP information received from a neighbor device, select Syste
m > Advanced >
LLDP > Neighbors Information.
Note: If no information has been received from a neighbor device, or if the
link partner is not LLDP-enabled, no information displays.
\
Figure 63. LLDP Neighbors Information
The following table describes the information that displays for all LLDP neighbors that have
been discovered.
Table 38. LLDP neighbor summary information
Field Description
MSAP Entry The Media Service Access Point (MSAP) entry
number for the remote device.
Local Port The interface on the local system that received LLDP information from a remote
system.
Chassis ID Subtype The type of data displayed in the Chassis ID field on the remote system.
Chassis ID The remote 802 LAN device's chassis.
Port ID Subtype The type of data displayed in the r
emote system’s Port ID field.
Port ID The physical address of the port on the rem
ote system from which the data was
sent.
System Name The system name associated with the remote device. If the field is blank, the
name might not be configured on the remote system.
To Next Page
Loading...
