NETGEAR S3300 User Manual

Configure System Information
43
S3300 Smart Managed Pro Switch
The following table describes the information displayed in the Versions section of the System
Information screen.
Table 8. System Information - Versions Information Fields
Field Description
Unit No. The unit number of the switch.
Model Name The model name of the switch.
Boot Version The version of the boot code on the switch.
Software Version The software version currently runni
ng on the switch.
System CPU Status
Use the System CPU Status screen to monitor the CPU, memory resources, and utilization
patterns across various intervals to assess the performance, load, and stability parameters of
member units.
 To display the System CPU Status information:
Select System > Management > System CPU Status > System CPU Status
The Syste
m CPU Status screen displays CPU Memory Status and CPU Utilization
information.
 To display a member unit’s CPU status information:
1. Sel
ect System > Management > System CPU Status > System CPU Status
2. In the CPU
Utilization > Unit No. field, select a unit number. Select All to run CPU
Utilization information for all units.
3. The unit’
s Memory Utilization Report is displayed.
The CPU Uti
lization screen displays the memory information, task-related information and
percentage of CPU utilization per task.

NETGEAR S3300 Specifications

General

Model	NETGEAR S3300
Category	Switch
VLAN Support	Yes
Quality of Service (QoS)	Yes
MAC Address Table Size	16K
Uplink Ports	4 x 10G SFP+
Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Layer	Layer 2+/Layer 3 Lite
Management	Web-based GUI, SNMP
Dimensions	440 x 257 x 43 mm (17.32 x 10.12 x 1.69 in)
Jumbo Frame Support	Yes
Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Humidity	90% maximum relative humidity, noncondensing
Power Supply	Internal power supply
Power Consumption	Varies by model
Ports	24 or 48 x 10/100/1000BASE-T
Weight	3.60 kg (7.94 lb)