NETGEAR S3300 - Configure Timer Schedule

Configure System Information
133
S3300 Smart Managed Pro Switch
The following table describes the non-configurable fields on the Timer Schedule Global
Configuration page.
Table 46. Timer Schedule Information
Field Description
Time Schedule
S
tatus
Specifies if the current status of the timer schedule is active or inactive.
ID Identifies the timer schedule. The maximum number of timer schedules that can
be created is 100.
Configure Timer Schedule
Use this screen to configure timer schedule.
 Select the Timer Schedule Criteria:
1. Sel
ect System > Timer Schedule > Advanced > Time Schedule Configuration.
2. Select th
e Timer Schedule Name to be configured.
3. Select th
e Timer Schedule Type of entry to be configured. The choices are Absolute or
Periodic. The factory default is Absolute.
4. Select th
e number of the Timer Schedule Entry to be configured or added. Select the
option New to add a new entry.
Figure 81. Timer Schedule Criteria

Configure the Timer Schedule:
1. Ent
er the Time Start. This is the time of day in hh:mm format when the schedule
operation is started. This field is required.