NETGEAR S3300 - Download

Maintenance
297
S3300 Smart Managed Pro Switch
3. In the File Path field, enter the path for the file to export. You may enter up to 139
characters. The factory default is blank.
4. In the USB File field, specify a destination filename for the file to export.
You can enter up to 32 characters. The factory default is blank. The transfer fails if you do
not specify a filename.
5. Click the Apply button. The file transfer begins.
The last row of the table displays non-configurable information about the progress of the file
transfer. This information is displayed only after the file transfer process starts.
Download
The switch supports system file downloads from a remote system to the switch by using
either TFTP or HTTP.
The Download menu contains links to the features described in the following sections.
• TFTP File Download on page 297
• HTTP File Download on page 300
• USB File Download on page 301
TFTP File Download
Use the Download File to switch screen to download device software, the image file, the
configuration files, and SSL files from a TFTP server to the switch.
Before you download a file to the switch, the following conditions must be true:
• The file to download from the TFTP server is on the server in the appropriate directory.
• The file is in the correct format.
• The switch has a path to the TFTP server.
You can also download files by using HTTP. See HTTP File Download on page 300 for
additional information.
Downloaded code is validated with a CRC check and a version check to protect against
download of malicious code. Export of image file (.stk) is not allowed.
 To download a file to the switch from a TFTP server:
1. Select Maintenance > Download > TFTP File Download.