NETGEAR S3300 - Page 298

Maintenance
298
S3300 Smart Managed Pro Switch
Figure 108. TFTP File Download
2. From the File Type list, specify what type of file you want to download to the switch. The
factory default is Software.
• Sof
tware. The system software image (STK) that is saved in one of two flash sectors
called images (image1 and image2). The active image stores the active copy while
the other image stores a second copy. The device boots and runs from the active
image. If the active image is corrupted, the system automatically boots from the
non-active image. This is a safety feature for faults occurring during the upgrade
process.
• T
ext Configuration. A text-based configuration file enables you to edit a configured
text file (startup-config) offline as needed without having to translate the contents for
the switch to understand. The most common usage of text-based configuration is to
export a working configuration from a device, edit it offline to personalize it for another
similar device (for example, change the device name, serial number, IP address), and
download it to that device.
• SSL T
rusted Root Certificate PEM File. SSL Trusted Root Certificate File (PEM
Encoded).
• SSL Server Certificate PEM File. SSL Se
rver Certificate File (PEM Encoded).
• SSL DH W
eak Encryption Parameter PEM File. SSL Diffie-Hellman Weak
Encryption Parameter File (PEM Encoded).
• SSL DH S
trong Encryption Parameter PEM File. SSL Diffie-Hellman Strong
Encryption Parameter File (PEM Encoded).
Note: It is recommended that you do not overwrite the active image. The
system will display a warning that you are trying to overwrite the active
image.