Configure System Information
40
S3300 Smart Managed Pro Switch
2. Define the following fields:
• System Name.
Enter the name you want to use to identify this switch. You can use up
to 255 alphanumeric characters. The factory default is blank.
• System Location. Enter the
location of this switch. You can use up to 255
alphanumeric characters. The factory default is blank.
• System Con
tact. Enter the contact person for this switch. You can use up to 255
alphanumeric characters. The factory default is blank.
3. Click the Appl
y button.
The system parameters are applied, and the device is updated.
The following table describes the status information
the System Information screen displays.
Table 4. System Information Screen Status Fields
Field Description
Product Name The product name that describes the switch.
Serial Number The serial number of the switch.
System Object OID The base object ID for the switch's enterprise MIB.
Date & Time The current date and time.
System Up Time The number of days, hours, and
minutes since the last system
restart.
Base MAC Address The universally assigned network address.
Temp (C) The general temperature of the switch in degrees Celsius.
Temperature Traps Range Identifies the minimum and maximum deg
rees of the temperature
traps range.
Note: NSDP supports TLV for Serial Number.
TLV Value Description
Serial Number 1…21 For Smart Switch:
1 Byte:
0-Invalid
1-Valid
Next 20 bytes: Serial number string
Temperature Sensors
This screen shows the temperature of different system sensors. The temperature is instant
and can be refreshed when you press the Update button.
To Next Page
Loading...
