NETGEAR S3300 - Page 41

Configure System Information
41
S3300 Smart Managed Pro Switch
Figure 21. System Information - Temperature Sensors Status
The following table describes the status information displayed in the Temperature Sensors
section of the System Information screen.
Table 5. System Information - Temperature Sensors Status Fields
Field Description
Unit The unit number in the stack.
Sensor The temperature sensor for the given unit.
Description The description of the temperature sensor.
Temp (C) The current temperature of
the specified sensor of the switch in
degrees Celsius.
State The unit temperature state.
Max Temp The maximum temperature of the CPU and MACs. The maximum
temperature
depends on the actual hardware.
Fans
The screen shows the status of the fans. These fans remove the heat generated by the
power, CPU and other chipsets.
Figure 22. System Information - Fan Status
The following table describes the status information displayed in the Fans section of the
System Information screen.
Table 6. System Information - Fans Status Fields
Field Description
Unit The unit number in the stack.
Fan The fan index used to identify the fan for the given stack member.
Description The description of the temperature sensor.
Type Specifies whether the fan module is fixed or removable.
Speed The fan speed.