NETGEAR S3300 - Page 255

Managing Device Security
255
S3300 Smart Managed Pro Switch
The default is IPv4.
4. In the TFTP Server IP field, specify the address of the TFTP server.
The address can be an IP address in standard x.x.x.x format or a hostname. The
hostname must start with a letter of the alphabet. Make sure that the software image or
other file to be downloaded is available on the TFTP server.
5. Enter the path of the file which you want to download in the Remote File Path field.
You can enter up to 96 characters. The factory default is blank.
6. In the Remote File Name field, specify the name of the file to download, including the path.
You can enter up to 32 characters.
7. Select the Start File Transfer check box.
8. Click the Apply button.
The file transfer starts. A status message displays during the transfer and upon
successful completion of the transfer.