NETGEAR S3300 - Page 34

Getting Started
34
S3300 Smart Managed Pro Switch
Figure 18. Select Multiple Ports
3. Configure the desired settings.
4. Click the Appl
y button.
The settings you configure in the heading row are
applied to all selected interfaces.
 To configure multiple LAGs:
1. Click the
LAGS link or the All link to display the LAGs.
2. Select the check box
next to each LAG to configure.
The check box associated with each interface is selected, and the row for each selected
inte
rface is highlighted.
3. Configu
re the desired settings.
4. Click the Appl
y button.
The settings you configure in the heading row are
applied to all selected interfaces.
 To configure all ports:
1. Ensu
re that the screen is displaying only ports, and not LAGs.
2. Select the check box
in the heading row.
The check box associated with every port is selected, and the rows for all ports are
hig
hlighted.