NETGEAR S3300 - Page 51

Configure System Information
51
S3300 Smart Managed Pro Switch
features to acquire an IPv6 address. Auto configuration can be enabled only when
DHCPv6 is not enabled on any of the management interfaces.
• DHCPv6. Next to Current Network Configuration Protocol, select DHCPv6 to enable
the DHCPv6 client on the interface. The switch attempts to acquire network
information from a DHCPv6 server. Selecting None disables the DHCPv6 client on
the network interface. When DHCPv6 is enabled, the DHCPv6 Client DUID field
displays the client identifier used by the DHCPv6 client (if enabled) when sending
messages to the DHCPv6 server.
4. In the IPv6 Gateway field, specify the default gateway for the IPv6 network interface.
The gateway address is in IPv6 global or link-local address format.
5. (Optional) Configure one or more static IPv6 addresses for the management interface.
a. In the IPv6 Prefix/Prefix Length field, specify the static IPv6 prefix and prefix to the
IPv6 network interface.
The address is in the global address format.
b. In the EUI64 list, select True to enable the Extended Universal Identifier (EUI) flag
for IPv6 address, or select False to omit the EUI flag.
c. Click the Add button.
6. Click the Apply button.