Registering OmniForm
Installation and Setup 9
• Double-click
Add/Remove Programs.
The Add/Remove Programs Properties dialog box appears.
• Click
Install...
in the
Install/Uninstall
tab.
• Click
Next>
and then
Finish
.
The OmniForm install screen appears.
3 Select
OmniForm 4.0
.
4 Follow all the instructions in the dialog boxes that appear.
During installation, you will be prompted to enter a serial
number. You can find the serial number on the label of the CD-
ROM.
OmniForm installs by default to the location c:\Program
Files\Caere\OmniForm. You can select another location if
you wish.
5 To install OmniForm Filler, repeat the preceding instructions,
but select
OmniForm Filler
when the install screen appears
instead of
OmniForm 4.0
.
Registering OmniForm
Register your copy of OmniForm with Caere Corporation to receive
notification of special offers and the best prices on product upgrades.
Some versions of OmniForm will only launch 25 times if you do not
register it.
If you purchased your product directly from Caere or if you were
previously registered, you may not need to register again. If your
version of OmniForm does not display a
Register
menu, then you do not
need to register.
To register OmniForm:
1 Click the
Register
menu to open the Register dialog box.
2 Click
Register Now
.
3 Fill out the information requested on the screen and then click
Next>
.
To Next Page
Loading...
Need help?
General
