Starting OmniForm
10 Chapter 1
4 Follow the instructions on the screen.
OmniForm will decide on the best method of registration
according to your country and computer system. It may try
using modem, FTP, or HTTP (Internet) connections to transmit
your registration information directly. Or, it may prompt you to
call a phone number or print out and mail in your registration
information.
After registration is complete, you will be given a registration number.
Be sure to write that number down and keep it handy in case you need
to use it for reinstallation. If you reinstall OmniForm using your
registration number on the same computer, you will not have to go
through the entire registration process again to reregister it.
To reregister OmniForm after reinstallation:
1Click the
Register
menu to open the Register dialog box.
2Click
Reregister
.
Starting OmniForm
This section describes how to launch OmniForm after it is installed.
Install your scanner and test it in Windows
before
using it with
OmniForm. Consult your scanner documentation or the scanner
manufacturer to resolve any scanner problems that may occur.
To start OmniForm:
1Click
Start
in the taskbar and choose
Programs
Caere
Applications
OmniForm 4.0
.
To Next Page
Loading...
Need help?
General
