Oce TCS500 - Page 51

51
Turn on and off the Océ TCS500 printer and the Océ Power Logic® Controller
Turn off the Océ Power Logic® controller and the printer
There are 2 possibilities.
[17]
Note: The Océ Power Logic
®
controller needs a few minutes to finish the shut down
process. To turn off the main power, wait until the shut down process has finished.
Setting Key Operator -
Printer - Settings -
Synchronize controller
power on / off
Action
Set to 'On'
■ Press the On / off button on the printer, or
■ From the 'System' menu in the Océ System
Control Panel, select 'Shut down'.
The Océ Power Logic
®
controller and the printer
both shut down.
Set to 'Off'.
■ Press the On / off button on the printer. (The
printer shuts down.)
■ Open the Océ System Control Panel application
on the Océ Power Logic
®
controller.
■ From the 'System' menu, select 'Shut down'. (The
Océ Power Logic
®
controller shuts down.)