Oki C650 - Page 110

Changing settings from the operator panel
- 110 -
Item
Factory
default
settings
Description
Paper Color Setting (Fn231) 0 Used for fine adjustment in case of
noticeable blur etc. in the print results during
color printing when [Plain] is selected as
[Media Type]. Decreases the value if
printing such as scattered or snow-covered
printing occurs in high-density printing.
Increases the value if printing is blurred.
Adjusts within the range of ±2.
Trans. Black Setting (Fn232) 0 Used for fine adjustment in case of
noticeable blur etc. in the print results during
mono printing when [Transparency] is
selected as [Media Type]. Decreases the
value if printing such as scattered or snow-
covered printing occurs in high-density
printing. Increases the value if printing is
blurred. Adjusts within the range of ±2.
Trans. Color Setting (Fn233) 0 Used for fine adjustment in case of
noticeable blur etc. in the print results during
color printing when [Transparency] is
selected as [Media Type]. Decreases the
value if printing such as scattered or snow-
covered printing occurs in high-density
printing. Increases the value if printing is
blurred. Adjusts within the range of ±2.
SMR Setting
(Fn234)
Cyan
0
Corrects printing variations for each color
due to differences in temperature and
humidity environments, printing
density/printing frequency. Changes the
value if there is burr in the image. Adjusts
within the range of ±3.
Magenta
0
Yellow
0
Black 0
BG Setting
(Fn235)
Cyan
0
Corrects printing variations for each color
due to differences in temperature and
humidity environments, printing
density/printing frequency. Change the
value if the underlay is dark. Adjusts within
the range of ±3.
Magenta
0
Yellow
0
Black 0
HU Setting Off Sets the mode to remove the dirt due to
leaving this machine idle for a long period of
time.
VL Cleaning Execute Improves the printing result when there are
white streaks in the vertical direction.
Gloss Mode Off A mode used to print with an increased
fixing temperature and improved gloss.
Please select [On] when you want to print
more glossy.
Drum Cleaning (Fn236) Off
Sets to empty the drum before printing when
white streaks appear in the horizontal
direction. When it is turned on, the
remaining service life of the image drum will
be shortened.