- 224 -
5. Fax
The entered PIN number is not displayed. Be sure to write the PIN number down and keep it safe.
18
Press [OK].
Registering a Bulletin Board Box
If you register a bulletin board box to the machine, you can have the other party retrieve a
document that is registered in the bulletin board box any time upon transmission request
from the other party.
1
Press [Device Settings] on the touch panel.
2
Press or several times and press [Admin Setup].
3
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999"
respectively.
4
Press [Fax Setup].
5
Press [Fcode Box].
6
Press [Register] of a box number.
To edit a registered Fcode bulletin board box, select [Edit].
7
Press [Bulletin Box].
8
Press the registration button of [Box Name].
9
Enter a box name.
You can enter up to 16 characters.
10
Press [OK].
11
Press the registration button of [Sub-Address].
12
Enter a sub address, and then press [OK].
To Next Page
Loading...
