- 439 -
11. Utility Software
•Fax Setup
• FaxServer Function
• Internet Fax Setup
Sets Internet Fax.
• Scanner Setup
• Print From USB Memory Setup
Set Print From USB Memory.
•Print Setup
Item Description
Default Settings Sets the image quality, density, and other default settings
for sending faxes.
Security Function Sets security for sending faxes.
Other Settings Sets other settings for sending faxes.
Item Description
Environmental Settings Sets the environmental settings.
Default Settings Sets the default settings.
Security Function Sets the security settings.
Item Description
Default Settings Sets the image quality, density, and other default settings
for scanning.
E-mail Setup Sets e-mail settings that are required for performing
Scan to E-mail.
USB Memory Setup Sets USB Memory settings for performing Scan to USB
Memory.
TWAIN Setup Sets TWAIN.
WSD Scan Setup Sets WSD Scan.
PC Scan Mode Sets PC Scan mode.
Scanner Adjust Sets Auto Color Judge Level and Blank Page Skip Level.
Item Item Description
Default Settings Sets default settings when printing from USB Memory.
Item Description
Print Menu Print Setup Sets the number of copies,
resolution, and other settings. When
using the printer driver, the values
that are set with the printer driver are
given priority over these settings.
Printer Adjust Sets manual timeout, jam recovery,
and other print adjustment settings.
Print Position Adjust Adjusts front X, front Y, back X and
back Y positions.
Drum Cleaning Sets cleaning of an image drum.
Hex Dump Displays all the received print data in
hex. To exit this mode, restart the
machine.
Color Menu Sets Color settings.
System Configuration Menu Sets operation modes, alarm release,
and other machine operation settings
for each situation.
Emulation PCL Setup Sets PCL.
PS Setup Sets PS.
XPS Setup Sets XPS.
IBM PPR Setup Sets IBM PPR Setup.
EPSON FX Setup Sets EPSON FX Setup.
Private Print Setup Job Verification Sets whether to verify a job before
printing. If enabled, the machine
verifies that the job is not altered
before starting printing. The security
is enhanced, however, it will take
longer to start printing.
Erase job option Sets how to delete a job. You can
overwrite deleted data so that it will
not be restored. If enabled, it will take
longer to delete.
Available value: No overwrite/Zero
out once/Multiple random overwrites
Storage Period of Jobs Sets the storage period of jobs. If the
set period elapses after jobs are
stored, the jobs will be automatically
deleted.
Available value: 15 minutes/
30 minutes/1 hour/2 hours/4 hours/
8 hours/12 hours/1 day/2 days/3
days/4 days/5 days/6 days/7 days
To Next Page
Loading...
Need help?
General
