- 440 -
11. Utility Software
• Management
You can set device settings.
• User Install
If [Auto] is selected for Time Setup, the time cannot be set from the operator panel.
• Job List
• Direct Print
• Transmission Settings
This function is displayed only if you log in as the administrator of the machine.
Item Description
Local Interface USB Menu Sets USB.
Access Control Setup Sets user authentication and access
control.
System Setup Sets display units and other settings.
Power Save Sets power save settings.
Memory Setup Sets the reception buffer size and
resource save area.
Language Maintenance Setup Sets Language settings.
Font Setup Sets the output mode for fonts.
Admin Password Sets an administrator password.
Reset Settings Initializes all the data that is set in
"Management", including speed dial,
copy and fax function settings.
Print Statistics Enables/disables consumable
counter.
Item Description
Power Setup Sets Auto power off and Power supply Return.
Fax Setup Sets a fax line, sender, and other settings.
Time Setup Sets the time to the machine.
Business Phone Setup Sets up business phones.
Other Settings Sets High humid mode.
Item Description
Job List Displays a list of print jobs that are sent to the machine.
You can delete unnecessary jobs.
Job Log Display the job history.
Item Description
Web Printing Specifies and prints a PDF file.
E-mail Printing E-mail Printing Prints a PDF, JPEG and TIFF file if it
is attached on an e-mail that the
machine receives.
Receive Settings Sets an e-mail receive settings.
To Next Page
Loading...
