Omron SYSDRIVE 3G3MV SERIES - Page 222

7-32
Name SpecificationModel
Protocol
Support Tool
WS01-PSTF1-E
The following peripheral devices support the protocol macro
function of the SYSMAC C200HX/HG/HE.
Spp
Personal computer environment
Personal
computer
IBM PC/AT or compatible computer
CPU Minimum requirement: Pentium 90 MHz
Recommended: Pentium 166 MHz or faster
OS Microsoft Windows 95 or Windows 98
Memory Minimum: 16 MB
Recommended: 24 MB min.
Hard disk Minimum: Available space of 24 MB
Recommended: Available space of 50 MB
Monitor SVGA or better
Drive FDD: 1 or more
CD-ROM drive: 1 or more
H Peripheral Devices and Support Software Manuals
• Refer to the following manuals for more details on all peripheral devices and support software.
Cat. No. Name
W339 SYSMAC CS Series Programmable Controller Operation Manual
W393 SYSMAC CJ Series Programmable Controller Operation Manual
W394 SYSMAC CS/CJ Series Programmable Controller Programming Manual
W340 SYSMAC CS/CJ Series Programmable Controller Instructions Reference Manual
W336 SYSMAC CS/CJ Serial Communications Boards/Units Operation Manual
W344 SYSMAC CX-Protocol Operation Manual
W302 SYSMAC C200HX/HG/HE Programmable Controller Installation Guide
W303 SYSMAC C200HX/HG/HE Programmable Controller Operation Manual
W319 SYSMAC Protocol Support Tool Operation Manual
W363 SYSMAC CQM1H Series Programmable Controllers/Inner Boards Operation Manual
W364 SYSMAC CQM1H Series Programmable Controllers/Inner Boards Programming Manual
W365 SYSMAC CQM1H Series Serial Communications Board Operation Manual
Communications Chapter 7