1-7
Appearance FunctionName
Decrement Key Decreases multi-function monitor numbers, parameter
numbers, and parameter set values.
Enter Key Enters multi-function monitor numbers, parameter
numbers, and internal data values after they are set or
changed.
RUN Key Starts the Inverter running when the 3G3MV is in operation
with the Digital Operator.
STOP/RESET Key Stops the Inverter unless parameter n007 is set to disable
the STOP Key. Functions as a Reset Key when an Inverter
error occurs. (See note.)
Note For safety reasons, the reset will not work while a RUN command (forward or reverse) is in effect.
Wait until the RUN command is OFF before resetting the Inverter.
Overview Chapter 1
To Next Page
Loading...
