Omron SYSDRIVE 3G3MV SERIES User Manual

3-13
Parame-
ter
Register Name Description Setting
range
Unit of
setting
Default
setting
Chan-
ges dur-
ing
opera-
tion
n001 0101 Parame-
ter write-
prohibit
selec-
tion/pa-
rameter
initializa-
tion
Used to prohibit parameters
to be written, sets parame-
ters, or change the monitor
range of parameters.
Used to initialize parameters
to default settings.
0: Sets or monitor parameter
n001. The parameters within
a range from n002 to n179
can be monitored only.
1: Sets or monitor the
parameters within a range
from n001 to n49 (i.e., func-
tion group 1 settings).
2: Sets or monitor the
parameters within a range
from n001 to n79 (i.e., func-
tion groups 1 and 2 set-
tings).
3: Sets or monitor the
parameters within a range
from n001 to n119 (i.e., func-
tion groups 1 through 3 set-
tings).
4: Sets or monitor the
parameters within a range
from n001 to n179 (i.e., func-
tion groups 1 through 4 set-
tings).
6: Clears the error log.
8: Initializes parameters to
default settings in 2-wire
sequence.
9: Initializes parameters in
3-wire sequence.
10: For the USA, initializes
parameter in 2-wire se-
quence.
11: For the USA, initializes
parameter in 3-wire se-
quence.
0 to 11 1 1 No
Preparing for Operation and Monitoring Chapter 3

Omron SYSDRIVE 3G3MV SERIES Specifications

General

Model	SYSDRIVE 3G3MV SERIES
Category	Inverter
Input Frequency	50/60 Hz
Output Frequency	0.1 to 400 Hz
Cooling Method	Forced Air Cooling
Input Voltage	200 to 240 VAC, 380 to 480 VAC
Horsepower Range	0.1 to 15 HP
Power Range	0.1 to 11 kW
Overload Capacity	150% for 60 seconds
Braking Unit	Built-in
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication	RS-485
Ambient Temperature	-10 to 50°C
Storage Temperature	-20 to 65°C
Humidity	5 to 95% RH (non-condensing)
Vibration	5.9 m/s² or less
Voltage Class	200V, 400V