Omron V1000 User Manual

1.4 Component Names
This section illustrates the drive components as they are mentioned in this manual.
u
IP20/Open-Chassis
n
Single-Phase AC200 V VZAB0P1B ~ VZAB0P4B
Three-Phase AC200 V VZA20P1B ~ VZA20P7B
A
B
C
D
E
F
G
H
I
J
L
K
A –
Fan cover
<1>
B – Mounting hole
C – Heatsink
D – Optional 24 V DC power supply connector cover
E – Terminal board Refer to Control Circuit
Terminal Block Functions on page 50
F – Terminal cover
G – Front cover screw
H – Front cover
I – Comm port
J – LED operator Refer to Using the Digital LED
Operator on page 66
K – Case
L –
Cooling fan
<1>
Figure 1.2 Exploded View of IP20/Open-Chassis Type Components Three-Phase AC200 V VZA20P7B
<1> The drives VZAB0P1B ~ VZAB0P4B and VZA20P1B ~ VZA20P4B do not have a cooling fan or a cooling fan cover.
1.4 Component Names
22
SIEP C710606 20 OYMC AC Drive - V1000 User Manual
7/16/2008-13:22

Omron V1000 Specifications

General

Cooling Method	Fan cooling
Enclosure Rating	IP20
Communication	Modbus RTU
Output Power	0.4-15kW
Output Frequency Range	0 to 400 Hz
Overload Capacity	150% for 60 seconds
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit
Operating Temperature	-10°C to +50°C
Storage Temperature	-20°C to +65°C
Humidity	5 to 95% RH (non-condensing)
Supply Voltage	200-240V AC (3-phase)