Omron V1000 User Manual

Parameter List
This appendix contains a full listing of all parameters and settings available in the drive.
B.1 PARAMETER GROUPS..................................................................................298
B.2 PARAMETER TABLE.....................................................................................299
B.3 CONTROL MODE DEPENDENT PARAMETER DEFAULT VALUES...........338
B.4 V/F PATTERN DEFAULT VALUES................................................................339
B.5 DEFAULTS BY DRIVE CAPACITY (O2-04) AND ND/HD (C6-01).................340
B.6 PARAMETERS THAT CHANGE WITH THE MOTOR CODE SELECTION
.........................................................................................................................348
Appendix: B
SIEP C710606 20 OYMC AC Drive - V1000 User Manual
297
7/16/2008-13:23

Omron V1000 Specifications

General

Cooling Method	Fan cooling
Enclosure Rating	IP20
Communication	Modbus RTU
Output Power	0.4-15kW
Output Frequency Range	0 to 400 Hz
Overload Capacity	150% for 60 seconds
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheating, Short Circuit
Operating Temperature	-10°C to +50°C
Storage Temperature	-20°C to +65°C
Humidity	5 to 95% RH (non-condensing)
Supply Voltage	200-240V AC (3-phase)