Preparing the Unloading Route and Unpacking Area
Preparing the Unloading Route and Unpacking Area
Ensure the system can get from the loading ramp to the installation site.
■
“Shipping Package Dimensions” on page 111
■
“Loading Dock and Receiving Area Requirements” on page 111
■
“Access Route Guidelines” on page 112
■
“Unpacking Area” on page 113
Shipping Package Dimensions
The following package dimensions apply to Oracle SuperCluster T5-8.
Parameter Metric English
Height 2159 mm 85 in.
Width 1219 mm 48 in.
Depth 1575 mm 62 in.
Shipping weight (full rack) 1009.2 kg 2225 lbs
Shipping weight (half rack) 721 kg 1586 lbs
Related Information
■
“Loading Dock and Receiving Area Requirements” on page 111
■
“Access Route Guidelines” on page 112
■
“Unpacking Area” on page 113
■
“Physical Specifications” on page 96
Loading Dock and Receiving Area Requirements
Before the rack arrives, ensure that the receiving area is large enough for the shipping package.
If your loading dock meets the height and ramp requirements for a standard freight carrier truck,
you can use a pallet jack to unload the rack. If the loading dock does not meet the requirements,
provide a standard forklift or other means to unload the rack. Alternatively, you can request that
the rack be shipped in a truck with a lift gate.
When the rack arrives, leave the rack in its shipping packaging until it arrives in its installation
site.
Preparing the Site 111
To Next Page
Loading...
Need help?
General