Oracle SuperCluster T5-8 User Manual

Installing the System
This chapter explains how to install Oracle SuperCluster T5-8.
■
“Installation Overview” on page 117
■
“Oracle Safety Information” on page 118
■
“Unpacking the System” on page 119
■
“Moving the Rack Into Place” on page 121
■
“Powering on the System for the First Time” on page 126
■
“Using an Optional Fibre Channel PCIe Card” on page 139
Installation Overview
This is a summary of the installation process.
1. Prepare for installation. Reference
1. Review the safety precautions, guidelines, site
checklists, and site requirements.
2. Ensure that the site is prepared for the
installation.
3. Complete the worksheets.
“Oracle Safety Information” on page 118
“Preparing the Site” on page 95
Oracle SuperCluster T5-8 Site Checklists and Oracle
SuperCluster T5-8 Configuration Worksheets
2. Begin the installation.
1. Unpack Oracle SuperCluster T5-8.
2. Place Oracle SuperCluster T5-8 in its allocated
space.
3. Perform preliminary checks before connecting
the power cords.
4. Verify the hardware by visually inspecting the
system.
“Unpacking the System” on page 119.
3. Power on the PDUs in the rack.
1. Connect rack power.
2. Switch on the six PDU circuit breakers located
on the rear of the main PDU (PDU A).
“Powering on the System for the First
Time” on page 126
Installing the System 117

Oracle SuperCluster T5-8 Specifications

General

Brand	Oracle
Model	SuperCluster T5-8
Category	Server
Language	English