View the SP Configuration
+-------------------------+-------+--------+-----------+-------+--------+
The following domains will be stopped and restarted:
ssccn2-dom4
ssccn2-dom1
ssccn2-dom3
This configuration does not require rebooting the control domain.
Do you want to proceed? Y/N :
user input: 'y'
Please wait while osc-setcoremem is setting up the new CPU, memory configuration.
It may take a while. Please be patient and do not interrupt.
Executing ldm commands ..
0% 10 20 30 40 50 60 70 80 90 100%
|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|
*=====*=====*=====*=====*=====*=====*=====*=====*=====*=====*
Task complete with no errors.
This concludes socket/core, memory reconfiguration.
You can continue using the system.
Related Information
■
“View the SP Configuration” on page 199
■
“Revert to a Previous CPU/Memory Configuration” on page 201
■
“Remove a CPU/Memory Configuration” on page 202
View the SP Configuration
When you reallocate resources using the osc-setcoremem command, osc-setcoremem saves the
new configuration to the service processor (SP) in this format:
CM_dom1_dom2_dom3_..._TimeStamp
where:
Maintaining the System 199
To Next Page
Loading...
Need help?
General