Oracle SuperCluster T5-8 User Manual

Remove a CPU/Memory Configuration
3.
Revert to a previous configuration.
# ldm set-config CM_2S1T_1S512G_3S1536G_082020141354
4.
Halt all domains, then halt the primary domain.
5.
Restart the system from the service processor.
# #.

-> cd /SP
-> stop /SYS
Are you sure you want to stop /SYS (y/n) ? y
Stopping /SYS

-> start /SYS
Are you sure you want to start /SYS (y/n) ? y
Starting /SYS
6.
Boot all domains and zones.
Related Information
■
“Access osc-setcoremem Log Files” on page 196
■
“View the SP Configuration” on page 199
■
“Remove a CPU/Memory Configuration” on page 202
Remove a CPU/Memory Configuration
The compute node's service processor has a limited amount of memory. If you are unable to
create a new configuration because the service processor ran out of memory, delete unused
configurations using this procedure.
1.
List all current configurations.
# ldm list-config
factory-default
V_B4_4_1_20140804141204
after_install_backup
CM_2S1T_1S512G_3S1536G_082020141354
202 Oracle SuperCluster T5-8 Owner's Guide • May 2016

Oracle SuperCluster T5-8 Specifications

General

Brand	Oracle
Model	SuperCluster T5-8
Category	Server
Language	English