Reviewing System Specifications
FIGURE 19
Dimensions for Rack Stabilization
Figure Legend
1
Distance from mounting hole slots to the edge of the rack is 113 mm (4.45 inches)
2
Width between the centers of the mounting hole slots is 374 mm (14.72 inches)
3
Distance between mounting hole slots to the edge of the rack is 113 mm (4.45 inches)
4
Distance between the centers of the front and rear mounting hole slots is 1120 mm (44.1 inches)
5
Depth of cable-routing floor cutout is 330 mm (13 inches)
6
Distance between the floor cutout and the edge of the rack is 160 mm (6.3 inches)
7
Width of floor cutout is 280 mm (11 inches)
Related Information
■
“Perforated Floor Tiles” on page 110
■
“Physical Specifications” on page 96
■
“Installation and Service Area” on page 96
98 Oracle SuperCluster T5-8 Owner's Guide • May 2016