ORTEC radEAGLE User Manual

7.7 Reachback Settings radEAGLE User Manual
7.7 Reachback Settings
This section (Fig. 116, p. 100) provides access to the settings for reachback methods de-
scribed in see 6.4, p. 84. Entering addresses and passwords is way more convenient via the
Web interface using a real keyboard than on the instrument itself.
You can make your changes permanent with APPLY. If you leave the reachback settings
without doing so, your changes are dismissed.
RADEAGLE
18181
Click to expand or col-
lapse subsections
Figure 116: The reachback settings in the Web interface
The settings are grouped into subsections you can expand or collapse as needed (Fig. 117,
p. 101).
You can send reachback messages to various recipients. The radEAGLE remembers a list
of addresses so you don’t have to enter them again and again but choose from the list. You
can manage this list here by adding and deleting addresses (Fig. 118, p. 102).
The currently selected recipient is decorated with a checkmark  (Fig. 117, p. 101). Click
 to select another recipient from the list.
100/147 Software 3.2.12 • Document 3.3.0o © innoRIID GmbH • 2019-04-11

ORTEC radEAGLE Specifications

General

Brand	ORTEC
Model	radEAGLE
Category	Metal Detector
Language	English