ORTEC radEAGLE - Connectivity; Wi-Fi Settings; The Connectivity Menu

5.7 Connectivity radEAGLE User Manual
Change
Edit the highlighted setting.
Exit
Return to the superior screen.
Down
Highlight the next item. Cycles to the top item after you reached the last item.
Select
Select the highlighted item.
5.7 Connectivity
This menu (Fig. 47, p. 52) provides access to settings for various connection devices plugged
into the USB-A host adaptor (Fig. 2a, p. 15) of your radEAGLE.
Items in this menu depend on the connected device. If a device is not available at a given
moment, the item is dimmed (grayed). Usually only one connectitvity method can be used
at a given time.
 Wi-Fi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see 5.8, p. 52
 Hotspot . . . . . . . . . . . . . . . . . . . . . . . . . . see 5.9, p. 54
 Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . see 5.10, p. 56
 USB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see 5.11, p. 57
 Services . . . . . . . . . . . . . . . . . . . . . . . . . see 5.12, p. 61
Figure 47: The connectivity menu
Settings and Commands
Exit
Return to the superior screen.
Down
Highlight the next item. Cycles to the top item after you reached the last item.
Select
Select the highlighted item.
5.8 Wi-Fi Settings
This item is available while a Wi-Fi dongle is plugged into the radEAGLE’s USB-A port.
This screen groups settings and status information to connect your radEAGLE to other
devices via Wi-Fi (Fig. 48, p. 53).
52/147 Software 3.2.12 • Document 3.3.0o © innoRIID GmbH • 2019-04-11