ORTEC radEAGLE User Manual

radEAGLE User Manual radEAGLE Advanced Menu
Figure 87: Settings for a new measurement
Figure 88: Collecting reachback data
All the listed measurements, both in *.spe and *.n42 format, will be combined into
a *.zip archive named after the date and time of the measurement.
You will be informed about the saved collection.
All measurements are stored in the radEAGLE’s database and can be accessed
via the usual methods, for example, the Web interface (see 7.10, p. 104) or sent
by mail (see 5.26, p. 78).
Settings and Commands
Down
Highlight the next item. Cycles to the top item after you reached the last item.
Change
Edit the highlighted setting.
Exit
Return to the superior screen.
© innoRIID GmbH • 2019-04-11 Software 3.2.12 • Document 3.3.0o 77/147

ORTEC radEAGLE Specifications

General

Brand	ORTEC
Model	radEAGLE
Category	Metal Detector
Language	English