ORTEC radEAGLE - The Alarm Settings

To Next Page

To Previous Page

radEAGLE User Manual radEAGLE Advanced Menu

Figure 72: The alarm settings

Warning Threshold

The dose rate threshold for warnings. The value must be lower than that for alarms.

Alarm Threshold

The dose rate threshold for alarms. The value must be higher than that for warnings.

Neutron Sensitivity

Set sensitivity for neutron alarms in several steps.

This item is available for radEAGLE models with a neutron detector (see E.1,

p. 135).

Setting Neutrons Integration Duration

-5 4 4 sec

-4 4 10 sec

-3 4 15 sec

-2 4 20 sec

-1

30 sec

Default ±0 4 40 sec

+1 4 80 sec

+2 4 100 sec

+3 4 140 sec

+4 4 180 sec

+5 4 220 sec

Exit

Return to the superior screen.

Down

Highlight the next item. Cycles to the top item after you reached the last item.

Change

Edit the highlighted setting.