radEAGLE User Manual radEAGLE Advanced Menu
Figure 69: Easy calibration finished
5.15 Protected Settings
You can access the protected settings of the radEAGLE via this menu (Fig. 70, p. 65).
Before accessing this menu you have to enter a password (see 2.2.4, p. 26).
System Information . . . . . . . . . . . . . . . see 5.16, p. 66
Alarm Settings . . . . . . . . . . . . . . . . . . . see 5.17, p. 66
Calibration . . . . . . . . . . . . . . . . . . . . . . . see 5.18, p. 68
亮 ID Settings . . . . . . . . . . . . . . . . . . . . . . . see 5.19, p. 69
Storage Management . . . . . . . . . . . . . see 5.22, p. 72
Set Password . . . . . . . . . . . . . . . . . . . . see 5.23, p. 75
Factory Settings . . . . . . . . . . . . . . . . . . see 5.24, p. 76
Figure 70: The protected settings menu
Settings and Commands
Exit
Return to the superior screen.
Down
Highlight the next item. Cycles to the top item after you reached the last item.
Select
Select the highlighted item.
© innoRIID GmbH • 2019-04-11 Software 3.2.12 • Document 3.3.0o 65/147
To Next Page
Loading...