OutBack Power MATE3 User Manual

Programming
118 900-0117-01-00 Rev B
Reset MATE3 to Factory Defaults Screens
This menu allows the user to erase all settings from the MATE3 and start over with the values programmed
at the factory.
Figure 146 Restoring the MATE3 to Factory Default Settings
Press <Continue> to return
to the MATE3 menu.
To access the Reset to Factory Defaults menu:
1. Access the Main Menu as shown in Figure 71.
2. Select the Settings Menu . (This option may be
highlighted by default.)
3. Select
MATE3 in the device Settings Menu .
4. Select the
Reset to Factory Defaults menu.
5. Select No or Yes .
 If <No> is selected, the screen returns to the
MATE3 menu. No changes will be made to
any settings.
 If <Yes> is selected, the MATE3's settings will
immediately change to the original factory values.
The screen will display the message
MATE3
Restored to Factory Defaults? A <Continue>
soft key will appear. Pressing this key will return
the screen to the
MATE3 menu.
6. After resetting the MATE3 to factory default
parameters:
 press the <Continue> soft key or the Up
navigation key to return to the MATE3 menu, or
 press the Top navigation key to return to the
Settings Menu .

OutBack Power MATE3 Specifications

General

Brand	OutBack Power
Model	MATE3
Category	Controller
Language	English