System Settings
900-0117-01-00 Rev B 77
Date and Time
The
Date and Time
screen allows the date and time to be set for the current date and current time.
IMPORTANT:
Some features are dependent on time and date settings. Be sure to adjust
these settings for the proper time and date for the location of the
installation.
The MATE3 clock does not automatically adjust for daylight savings time.
The MATE3
does
automatically adjust for leap year.
Figure 78 Date and Time Menu Item
LCD Display
Ambient lighting and personal eyesight varies with every installation. Therefore, the contrast, color,
brightness, backlighting, and auto timeout of the LCD can be adjusted to provide the best visibility for a
given location.
Figure 79 LCD Display
Day of the week
Mon
(Monday) to
Sun
(Sunday)
Hour
0
to
23
Minutes
00
to
59
Day
1
to
31
Month
Jan
(January) to
Dec
(December)
Year
2011
+
Set Points:
Contrast
– Range is from
1
to
100
, from lowest contrast to highest contrast
Color
– Range is from
1
to
11
discrete display colors
Brightness
– Range is from
1
to
10
, from dimmest to brightest
Backlight
–
On
,
Off
or
Auto
(see
Auto Timeout
below)
Auto Timeout
– The amount of time that will elapse before the screen backlight turns off.
Range is from
1
to
300
seconds.
To Next Page
Loading...
Need help?
General
