Dialing Enabled/Disabled
Section [3036]
Option [3]
Reporting Account Numbers
Monitoring Station
Telephone Numbers
1 to 4 (32 digits)
Sections [3071] to [3074]
Event Call Direction
Defines to which Monitoring
Station Telephone Number
each specific group of events
will be reported.
REPORTING FORMATS
SECTION [3070]
FIRST DIGIT= MSTN #1
SECOND DIGIT=MSTN #2
THIRD DIGIT=MSTN #3
FOURTH DIGIT=MSTN #4
PARTITION 1
PARTITION 2
PARTITION 3
PARTITION 4
PARTITION 5
PARTITION 6
PARTITION 7
PARTITION 8
REPORTING ACCOUNT NUMBER 1
3 OR 4 DIGITS (0-F) IN SECTION [3061]
REPORTING ACCOUNT NUMBER 2
3 OR 4 DIGITS (0-F) IN SECTION [3062]
REPORTING ACCOUNT NUMBER 3
3 OR 4 DIGITS (0-F) IN SECTION [3063]
REPORTING ACCOUNT NUMBER 4
3 OR 4 DIGITS (0-F) IN SECTION [3064]
REPORTING ACCOUNT NUMBER 5
3 OR 4 DIGITS (0-F) IN SECTION [3065]
REPORTING ACCOUNT NUMBER 6
3 OR 4 DIGITS (0-F) IN SECTION [3066]
REPORTING ACCOUNT NUMBER 7
3 OR 4 DIGITS (0-F) IN SECTION [3067]
REPORTING ACCOUNT NUMBER 8
3 OR 4 DIGITS (0-F) IN SECTION [3068]
MSTN = MONITORING
STATION TELEPHONE
[0]
ADEMCO SLOW
[1]
SILENT KNIGHT
[2]
SESCOA
[3]
ADEMCO EXPRESS
[7]
PAGER
[6]
SIA FSK
[5]
ADEMCO CONTACT
Puls
DTM
PROGRAM 2-DIGIT (00-FF)
REPORT CODES INTO:
SECTIONS [0201] TO [0296]
SECTIONS [0701] TO [0732]
SECTIONS [0801] TO [0832]
SECTIONS [2001] TO [2099]
SECTIONS [2101] TO [2199]
SECTIONS [3900] TO [3991]
SECTIONS [4030] TO [4037]
MANUAL & AUTOMATIC PROGRAMMING OF REPORT CODES, REFER TO:
1) ADEMCO CONTACT ID AND SIA FSK UNDER Reporting Formats ON PAGE 73
2) Auto Report Code Programming ON PAGE 77
DIALING SEQUENCES FOR ARM/DISARM REPORT CODES
PARTITION 1 = [3127] PARTITION 5 = [3527]
PARTITION 2 = [3227] PARTITION 6 = [3627]
PARTITION 3 = [3327] PARTITION 7 = [3727]
PARTITION 4 = [3427] PARTITION 8 = [3827]
DIALING SEQUENCES FOR ALARM/RESTORE REPORT
CODES
PARTITION 1 = [3128] PARTITION 5 = [3528]
PARTITION 2 = [3228] PARTITION 6 = [3628]
PARTITION 3 = [3328] PARTITION 7 = [3728]
PARTITION 4 = [3428] PARTITION 8 = [3828]
DIALING SEQUENCES FOR TAMPER/RESTORE REPORT
CODES
PARTITION 1 = [3129] PARTITION 5 = [3529]
PARTITION 2 = [3229] PARTITION 6 = [3629]
PARTITION 3 = [3329] PARTITION 7 = [3729]
PARTITION 4 = [3429] PARTITION 8 = [3829]
DIALING SEQUENCE FOR
TROUBLE/RESTORE REPORT CODES: [3080]
DIALING SEQUENCE FOR
SYSTEM SPECIAL REPORT CODES: [3081]
[1] = CALL MONITORING TELEPHONE
1
[2] = CALL MONITORING TELEPHONE
2
[3] = CALL MONITORING TELEPHONE
3
[4] = CALL MONITORING TELEPHONE
4
[5] = BACKUP ON TELEPHONE 1
[6] = BACKUP ON TELEPHONE 6
[7] = BACKUP ON TELEPHONE 7
[8] = BACKUP ON TELEPHONE 8
FOR EACH SECTION (DIALING
SEQUENCE) ENABLE UP TO 4
MONITORING STATION TELEPHONE
NUMBERS AND 1 BACKUP
TELEPHONE NUMBER. THE NUMBERS
ARE DIALED SEQUENTIALLY FROM 1
TO 4 FOLLOWED BY THE BACKUP
NUMBER. THIS SEQUENCE WILL
CONTINUE UNTIL EACH NUMBER HAS
BEEN DIALED AT LEAST ONCE.
Related Features
Delay Before Alarm Transmission: [3055]
Pager Format Delay Transmission: [3057]
Recent Closing Delay
Sections [3109], [3209], [3309], [3409],
[3509], [3609], [3709] and [3809]
Power Failure Report Delay: [3058]
Auto Test Report: [3040] and [3041]
Report Disarm Options
Option [7]: Sections [3123], [3223], [3323],
[3423], [3523], [3623], [3723] and [3823]
Report Zone Restore Options
Section [3037] Option [8]
Alternate Dial
Section [3037] Option [6]
MAXIMUM DIALING ATTEMPT
SECTION [3056]
DELAY BETWEEN DIALING ATTEMPTS
SECTION [3054]
To Next Page
Loading...
Need help?
General
